Many homeowners here in Lyndon are looking to replace their worn-out windows with new windows that operate and perform better, are more durable, require considerably less maintenance and are more energy efficient than the wood, steel or aluminum windows that were used when their homes were built.
Most people look at new windows as an expense, they’re not. New windows are an investment in your home. An investment which, if made wisely, not only increases the value of your Lyndon home, but at the same time, cuts your energy bills, increases your comfort and reduces maintenance cost. However, like any investment decision, you need to determine what gives you the greatest value, not necessarily the lowest price.
You need to educate yourself so you really understand what you are getting for your money. This is why it is important for a homeowner to work with someone they trust who walks them through the various options so they can make an educated buying decision.In most cases, style is already determined by the architecture of the house and the type of windows that are presently there. However, it is possible to change window styles, change opening sizes, add bays and bows, or do a variety of other things that will dramatically change the appearance of your home inside and out.
Since it represents the largest area of the window, glass obviously has the biggest impact on energy loss. Glass technology has made tremendous strides over the last few years. Things like low conductivity spacers, low emissivity, or Low-E, coatings and gas filling have drastically cut the amount of energy that flows through the glass.Low-E is an almost invisible metallic coating that works like a one-way mirror, reflecting heat back into your home during the winter and reflecting it out during the summer.
There are different types of Low-E coatings with different performance levels. Better performing coatings, like Titanium, cost a little more, but are well worth the money. Don’t settle for products made with regular clear glass that is not coated.Warranties are also very important. Be sure you understand them fully. Just because it says Lifetime don’t assume every component of the window and installation is covered forever. And remember, the warranty is only as good as the people who back it.
Replacement Windows – A Buyers Guide For Lyndon Homeowners
In most of the newer homes single pane windows are not usually used but you will see them in older homes. Because of the price of the window, some homeowners still prefer to have them in their home even if they are not as energy efficient as double or triple pane windows. Repairing this window is not as time consuming and much simpler. If it has a crack, you may have to repair just that area instead of replacing the entire window. The one drawback with single paned windows is that they cannot provide the insulation quality many homeowners demand today.
Repair a single pane window
• Removing the window glass-to remove the window pane apply adhesive tape on the middle section or the border; It is done this way because to the glass out it will have to be broken out in order to replace it. Put the adhesive tape in place and gently break the window pane with the hammer so it will not shatter.
• Getting rid of the glazing compound-around the window there is a glazing compound. You can usually remove it with a chisel or the substance may just fall off on its own. Sometimes the compound will have a good grip and not come off on its own.
• Clean the frame-the frame, which is the rest of the unit, will have to be clean before the new glass window can be installed. Scrape any remains of the compound off the frame along with any other hindrance that could cause a problem during the installation of the new window.
• Installing the new glass-before you install the new glass make sure that you line the wooden frame with primer. If it is an aluminum frame, you will not have to put primer in the frame. The sheet of window glass you bought is generally larger than the one you are replacing. You will need to measure the width and length of the one window glass that is being replaced. Cut the new window glass making sure that it is one-eighth smaller so it will fit easily into the window frame
• Glazing and caulk compound application-apply a lining of call on the new window pane so there will be a type of bedding on the glass to be installed. The glazier points will have to be pressed through the window pane. If the window frame is aluminum based metal or just metal, you would use clips to hole the window glass in place. You also have to have some glazing compound between the window pane and glass.
Once the window glass is installed, clean the glass to remove any traces of the glazing compound or chalk.
Triple Pane Windows - Insulate Your Home With High Quality Windows
Whether you want to replace your cold, drafty windows or simply want to enhance the overall appearance of your home, you will have to go in for replacement windows even though choosing the right replacement windows is a burdensome task and involves a significant investment. Replacement windows squeeze in air between two panes of glass, providing a layer between the inside of your home and the weather outside. Thus, replacement windows insulate your home from extremes of both hot and cold. And at the same time reduce your homes energy costs and change its decor. Replacement windows come in many shapes, sizes, and styles to match your home. Basically, there are four types of replacement windows: (i) replacement windows add light and style to your home; (ii) skylights brighten the room and add an interesting design element; (iii) sliding doors are another form of replacement windows; and (iv) the slider helps you save on energy, especially in summer, because you can leave the screened portion open. Before you buy replacement windows, you need to decide how you want them to open. Again you have various choices, such as: (a) casement windows with vertical hinges that swing in or out by winding a handle; (b) double or single hung types made of two cases that slide up and down; (c) sliding windows that move horizontally; and (d) plain fixed form windows that dont open at all, but let the light come in. You also need to see how your replacement windows have been fabricated to make sure they match with the architecture of your home and provide maximum insulation. You can now choose from some recent manufacturing developments like vinyl and fiberglass that are highly insulating. Vinyl windows are a popular and economical alternative to aluminum, wood, and fiberglass, because they are energy efficient, easy to install, and effortless to maintain. Made from a plastic called polyvinyl chloride, or PVC they provide a superb degree of insulation. Moreover, they require practically no maintenance because their durable surfaces are already stained, finished, and sealed. The exterior casing of vinyl windows doesn't fade or wear under ultraviolet sunlight, making them far more durable than aluminum or wood. For the purpose of energy efficiency, you can go in for triple-pane windows that have three pieces of glass with layers of air between them. Air absorbs heat and cold much better than glass. You can further reduce air conditioning and heating costs if you replace the air with a gas called argon. While shopping for replacement windows, visit many showrooms and make sure that the window is 'user friendly'. Try it out to see if it opens and closes with ease. You must remove all your doubts before scheduling an installation. Also, look for certification information from the National Fenestration Rating Council to compare the energy efficiency of each brand and style of window. Dont forget to see the actual warranty before making your purchase and understand all the details. Replacement windows involve heavy expenditure, so it is important you make an informed and confident decision based on the needs of your house, the kind of windows to be replaced, and your budget constraints.